Blue Sea 3000 Heavy Duty onoff Battery Switch 600a900a

Product Description

A single battery can be connected simultaneously to a single load group, Ignition protected and safe for installation aboard gasoline-powered

ABYC requirements include IP66 waterproof, ISO 8846 standards, and an ABYC compliance package

Battery cables up to 4/0 AWG (95mm2) may be connected to the system.

1/2" is the diameter of the terminal studs.

The continuous rating is 600 Amps, the maximum voltage is 32 VDC

Questions & Answers

Does this switch allow power to flow in both directions? Does it need to be charged or discharged?

Yes, it's just a switch, so the flow of power can either go one way or the other

Can you tell me how many cranking amps it has?

In 30 seconds, 1750 amps were used

Does the package actually have the following dimensions and not the packaging dimensions?

The size of the piece is 10cm by 10cm and it has a height of

Why does ignition protected mean that the ignition is protected?

As a result, this switch can be used in an engine room or other space where explosive fumes may exist. In the event that the switch were to spark internally, it would be designed to 'protect' against causing explosive vapors to ignite.

Selected User Reviews For Blue Sea Systems HD-Series Heavy Duty On-Off Battery Switch, Beige (3000)

The switch is waterproof and ignition protected, and it is IP66 rated

5/5

Featuring an ignition lock and IP66 waterproof rating, this switch is of high quality. One side of the "single circuit" switch (3000) has two lugs in common so there is even more room for cable connections. Each connection stud is tin-plated and long enough for multiple cable lugs to be connected. In boats and motorhomes, the continuous ratings of 600A, 900A (5 minutes) and 1750A (30 sec) are adequate to handle the demands of heavy-duty applications. As you can see, the cable lug studs are for 1/2" diameter lugs. If you are relocating cables from a different source, you will probably need to drill out or replace the cable lugs. I have installed several of these and have never seen them fail.

Eric Singleton

Eric Singleton

| Jun 12, 2021

Thank you for the gift

5/5

I like how it was I will be using this for my winch in the Jeep and need something that can handle up to 450 amps when it's at its full draw. It will be installed as a surface mount with none of the original hardware The lugs will be relatively close to the surface and therefore need to be covered with conductive material. I hope to decrease the possibility of similar or worse situations by installing this switch. I burned up one winch motor with a short.

Byron Bartlett

Byron Bartlett

| Aug 31, 2020

Easily cut off a battery bank that has a large quantity of batteries

5/5

My fifth wheel was equipped with this product to cut off battery power altogether. There is a larger size than I thought it would be, but that is not a problem. This is a very sturdy piece of furniture. A good feature of this switch is its high amperage capability. Moreover, I will be able to expand my lithium battery bank without requiring me to upgrade my cut-off.

Raegan Poole

Raegan Poole

| Jun 12, 2021

A Godd switch can be mounted on a bulkhead

5/5

Due to the large hole that would have to be cut into this unit (or even more), I finally decided to consider the Flaming River FR1044 battery disconnect/big switch with lock - As it requires a 1 and 1/16 inch hole, it is not recommended for Out XL.

Dakota Blevins

Dakota Blevins

| Mar 28, 2021

A travel trailer with all the bells and whistles

5/5

A switch like this one is installed on my travel trailer and it seems to function well. It would have been just fine for my set if I had been on regular duty It's a little fuzzy up here, but I'd say it looks better in grey and I thought the HD version would be superior to There were a lot of ring connectors not readily available since this switch has 1/2' posts instead of the standard 3/8". In the end, I am very pleased with my purchase of the regular duty version. If given the choice again, I would order the regular duty version.

Miranda Avery

Miranda Avery

| Mar 08, 2021

This is an easy to install application

3/5

If you are installing this inside, it won't be.

Emmie Bowers

Emmie Bowers

| Dec 28, 2020

I'm very happy with the I'm very happy with the If the lugs are bigger than 10mm, you need to use 10mm holes

5/5

Melanie Cantrell

Melanie Cantrell

| Apr 10, 2021

I like it very much! The exact thing I was looking for

5/5

I was very pleased with the pricing and the quality of the product.

Alison Woodard

Alison Woodard

| Jan 25, 2021

barriosinght1974.blogspot.com

Source: https://overeview.io/sports-outdoors/fitness/boating-sailing/electrical-equipment/switches/blue-sea-systems-hd-series-heavy-duty-p237998

0 Response to "Blue Sea 3000 Heavy Duty onoff Battery Switch 600a900a"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel